Page 1 of 1
Bolt size
Posted: Wed Nov 28, 2007 5:28 pm
by sirwilliam
Would anyone know offhand the size of the bolts that connect the axelback and the midpipe? A friend needs to cut the rusty ones off and replace them to swap my exhaust.
Let me know. Thanks.
Note: WRX/STi/FXT are all the same.
Posted: Wed Nov 28, 2007 5:33 pm
by ElZorro
(ninja move)
Posted: Wed Nov 28, 2007 5:33 pm
by sirwilliam
Friend wanted to know this before he goes home after work. Let me know ASAP.
Posted: Wed Nov 28, 2007 6:10 pm
by Sabre
14mm bolts... Every AutoZone/TrackAuto etc. carries them. Just look for this:
Posted: Wed Nov 28, 2007 9:57 pm
by sirwilliam
Sabre wrote:14mm bolts... Every AutoZone/TrackAuto etc. carries them. Just look for this:
You are showing me the bolts for the donut flange juncture...but thanks anyways
Posted: Wed Nov 28, 2007 11:36 pm
by Phibs
Yeah that is the Downpipe to the Midpipe hmm.... If I had to guess i'd say 12 or 14mm, 10 seems small for that application and everything else in the car is either 12 or 14
Posted: Thu Nov 29, 2007 9:50 am
by Sabre
It's 14mm bolt's down the entire exhaust... so I'm guessing you'd be good with a 14mm. Just curious... why does it matter? If you're replacing the nut/bolt anyway, just get something that fits and that is an 8+ so it won't rust.
Posted: Fri Nov 30, 2007 3:14 am
by complacent
Pretty sure the majority of teh exhaust bolts are 14's.
(i think)
Posted: Fri Nov 30, 2007 2:27 pm
by Libra Monkee
IIRC They are.