Cereb Daithi's Open Class Rally Car

Cereb Daithi · Post by **Cereb Daithi** » Sat Jul 31, 2010 11:15 am

In celebration we broke out the choppers

....and the shifter kart. I'll post up a video of that madness a litte later.

Post by **Sabre** » Sat Jul 31, 2010 2:25 pm

Shifter karts are insane.... I need one

Post by **complacent** » Sat Jul 31, 2010 3:51 pm

Sabre wrote:Shifter karts are insane.... I need one

two pls.

Cereb Daithi · Post by **Cereb Daithi** » Sat Jul 31, 2010 5:25 pm

Some fun on the Havspeed shifter kart.

http://www.youtube.com/watch?v=aRVkKXMM-aI[/video]

Cereb Daithi · Post by **Cereb Daithi** » Fri Aug 06, 2010 4:54 am

We're now on facebook! Click to join the group
Link here

Cereb Daithi · Post by **Cereb Daithi** » Fri Aug 06, 2010 10:02 pm

New clutch/brake pedal assembly ordered and on the way!

The factory pedal box was not working the way we were setting the car up so it these Tiltons will be going in,

Cereb Daithi · Post by **Cereb Daithi** » Mon Aug 16, 2010 4:47 pm

Pedals now in.

Things are getting closer to being done at Havspeed. The official still-to-do list before it comes back to PA is

- Finish last of seam welding
- Fabricate/Install thicker steel rocker panels
- Install holes for pin-stand
- Fabricate mount for hydraulic e-brake
- Mount hydraulic e-brake
- Weld mounting points for underbody protection.
- Weld/install Howe 1.5:1 steering quickener.
- Powdercoat the whole inside

prorallycodriver · Post by **prorallycodriver** » Mon Aug 16, 2010 10:24 pm

Haven't heard of the Howe rack. I do know many of the Subie's I've codriven in rally have the Q-Rack.

http://www.q-rack.com/

Cereb Daithi · Post by **Cereb Daithi** » Mon Aug 16, 2010 10:41 pm

It's not a rack. It's a quickener that goes in line with the steering column.

I'm familiar with Q-Rack and it's certainly proven. However I'm avoiding modifying the rack due to the cost and the fact that the rack is much more likely to fail than the column. This has been used very successfully in the past by other people I have known. It basically gears up the column. This also gives me good options based on the fact that it can be flipped to gear down the colum... or it also can be used with different racks to produce different results.

Apart form this the Howe quickener is easily removed, and easily disassembled for maintenance and much much cheaper.

Cereb Daithi · Post by **Cereb Daithi** » Tue Aug 17, 2010 9:07 pm

Well the cage is officially done. Gussets are in and everything looks great. Now to finish the rest of that do-do list.

So it looks like we're going with 20 gauge steel rocker panels. The company that Andrew knows if fabbing them up right now. They shold be ready inside a few days and then those go on.

I'll be talking to the e-brake manufacturer to get that shipped off to the car and then it'll be time to get that installed. Here's a preview of that

Thinking of changing the handle. Still haven't decided how I want it yet. The mount itself will be slightly rotated and mounted high so it's more of a natural feel to pull and I can return to the wheel quickly. When used in conjunction with the dual master cylinders the tilton's provide me it should provide a very nice braking setup.

Post by **Sabre** » Wed Aug 18, 2010 10:32 am

Cereb Daithi wrote:When used in conjunction with the dual master cylinders the tilton's provide me it should provide a very nice braking setup.

Indeed!

Post by **complacent** » Wed Aug 18, 2010 5:06 pm

Cereb Daithi wrote: Thinking of changing the handle. Still haven't decided how I want it yet.

two words: beer tap

zaxrex · Post by **zaxrex** » Thu Aug 19, 2010 3:29 pm

I'll see your two words, and raise you two pictures
Beer Tatas

But Dave already has more than his hands full on this project.

Cereb Daithi · Post by **Cereb Daithi** » Sun Aug 29, 2010 3:20 pm

Things are coming to an close at Havspeed. Just a few quick updates:

Steering quickener installed

Gussets and pin stand mounts finished (cage now done)

Steel rocker panels now on

Just a few more seam welds and some weld-nuts and we'll be ready to powdercoat.

Post by **Sabre** » Sun Aug 29, 2010 4:03 pm

It's looking great Dave!

prorallycodriver · Post by **prorallycodriver** » Mon Aug 30, 2010 12:12 am

Cereb Daithi wrote: some weld-nuts

Sounds painful.

zaxrex · Post by **zaxrex** » Mon Aug 30, 2010 11:01 am

Good ol' Harbor Freight engine stand special in the background there.
don't loose the locking pin.

prorallycodriver · Post by **prorallycodriver** » Thu Sep 02, 2010 12:09 am

Cereb Daithi · Post by **Cereb Daithi** » Thu Sep 02, 2010 12:27 am

Yep haha. The bikes were originally made to promote Havspeed at a meet at OCC. Rick Petko and a few of the other guys gave it a ride.

So I guess this means I can say I've ridden the same chopper bikes as the OCC guys. Hm.

Cereb Daithi · Post by **Cereb Daithi** » Mon Sep 13, 2010 3:15 pm

More pics coming soon. All welding is now done and the hydraulic handbrake is mounted (not hooked up). The car is now ready to go off to CT for powdercoating.

Cereb Daithi · Post by **Cereb Daithi** » Wed Sep 29, 2010 7:40 pm

HUGE UPDATE! This will take multiple posts.

I'll let the pictures do the talking.

Cereb Daithi · Post by **Cereb Daithi** » Wed Sep 29, 2010 7:40 pm

Cereb Daithi · Post by **Cereb Daithi** » Wed Sep 29, 2010 7:41 pm

Cereb Daithi · Post by **Cereb Daithi** » Wed Sep 29, 2010 7:41 pm

Cereb Daithi · Post by **Cereb Daithi** » Wed Sep 29, 2010 7:41 pm

DCAWD.com

Cereb Daithi's Open Class Rally Car

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Nice pics

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe