The roof/ rear window vane/ spoiler thingy on the 06

Libra Monkee · Post by **Libra Monkee** » Thu Jul 20, 2006 5:44 pm

Does anyone know how to remove it? See, I went and bought this thing:

Yeah okay I know it's kind of ricey but it's supposed to direct airflow better so it actually has a purpose too. Anyhow, I don't know how to get the stock one off to put this one on. Any ideas?

Post by **Sabre** » Thu Jul 20, 2006 5:59 pm

IIRC, it's screwed on. Not sure how though

Mr Kleen · Post by **Mr Kleen** » Thu Jul 20, 2006 6:13 pm

you have to remove the interior trim panel, then you can see the bolt.

Libra Monkee · Post by **Libra Monkee** » Thu Jul 20, 2006 11:40 pm

Ahhhhhh crud! I was afraid of that. Oh well I save for the next install day. That way I can do my intake and exhaust at the same time, hopefully.

Mr Kleen · Post by **Mr Kleen** » Fri Jul 21, 2006 10:03 am

if you've got the piece, do it this weekend. shouldn't be too bad. the back seats pull out pretty easy, it's the trim panels above the rear seats that I'm not sure about. how hard can it be?

Cereb Daithi · Post by **Cereb Daithi** » Fri Jul 21, 2006 10:21 am

Mr Kleen wrote:how hard can it be?

famous last words.. right up there with "oh dont bother unplugging it this will only take a second"

Libra Monkee · Post by **Libra Monkee** » Wed Aug 02, 2006 12:37 pm

Cool this may not be as complicated as I thought.

PlantinumTurbo on iwsti.com wrote:^^ It fairly easy. First thing to do is to unscrew and unclip the plastic screw on the inside of the wing. (one on each side) Once that's done you'll need to gently pry off the outside covers (body coloured plastic). Be very gentle with this as the two clips holding each cover in place are very brittle and might break. I used a small screwdriver wrapped in cloth to pry them off. Once the covers are off, there are 2 bolts on each side which hold the black metal piece in place.

No I still haven't done it yet. If I end up not going to the movies tonight this is what I'll be doing. At least while I still have daylight. I'll let you know it goes. *crosses fingers*

sirwilliam · Post by **sirwilliam** » Wed Aug 02, 2006 1:11 pm

Why don't you keep all three on the back?

Post by **Sabre** » Wed Aug 02, 2006 1:37 pm

That would be so HOT

and then we'd throw tomato's at your car at the next meet for being a ricer

Libra Monkee · Post by **Libra Monkee** » Wed Aug 02, 2006 7:42 pm

sirwilliam wrote:Why don't you keep all three on the back?

How about "NO"? Ya crazy bastard?

Anyhow the deed is done and it looks schweet! Had a little difficulty getting one of the covers off though so it got a few minor scratches and one chip but you can't notice them until you get up close. Plus I had to break out the Dremel because not all of the holes on the vane lined up the brackets way they were supposed to.

Mr Kleen · Post by **Mr Kleen** » Wed Aug 02, 2006 11:19 pm

another victory for Team Dremel!

sirwilliam · Post by **sirwilliam** » Thu Aug 03, 2006 12:28 pm

Mr Kleen wrote:another victory for Team Dremel!

Yes, and if anyone needs to use it, I have a pretty sweet Dremel kit w/ no Dremel...I have this Dewalt super power rotodrill but the dremel stuff doesn't work w/ it.

Post by **complacent** » Thu Aug 03, 2006 1:01 pm

Libra Monkee · Post by **Libra Monkee** » Thu Aug 03, 2006 4:16 pm

Ask and ye shall receive:

Post by **complacent** » Thu Aug 03, 2006 4:32 pm

oooh....puuuurdy. me likey

Post by **Sabre** » Thu Aug 03, 2006 5:14 pm

Sorry, I couldn't help it!!!!! Looks good man!!!!!