Page 1 of 3

Skid plate? Diff plate?

Posted: Mon Feb 15, 2010 2:38 pm
by Sabre
Hey all,
I contacted Paul over at Primitive since I was planning on ordering a skid plate and Will's purchase reminded me of that :) turns out, he'll give discounts :) Here are the prices:
Your 1/8" plates are $235 + $15(Filter/Drain hole) + $18(After market headers) + shipping. Add $15 to get our rear "Up Armor" that doubles the bottom thickness to a full 1/4" on the rear plate and adds up-turned front and rear lip to the rear diff cover (nice touch and beefy at low weight-under 2 lbs total!) Add $45 if you want the sweet new stinger tail added to the front plate that gets the area under the sump to 1/4" and extends back to front part of tranny.

We do currently offer $20 off each plate for orders of 3-5 plates and $25 off orders of 6-9 plates.
I'm looking at the "Full Body Armor (Street) 1/8" Front/Rear" which is $235 plus the little addons. Anyone else interested?

List of people buying:
Julian - Full Body Armor (Street) 1/8" Front/Rear($235), filter/drain hole($15), after market headers($18), stinger($45), Up Armor($15)
Gabe - WRX 3/16" Rear Skidplate($95)
Will - Street Armor: 1/8" front - 1/8" mini rear($270), filter/drain hole($15), after market headers($18), stinger($45), Up Armor($15)


Pictures :)
02-10 WRX-STi frt skidplate stinger vented.jpg
Double thick Sti mini rear skidplate.jpg

Re: Skid plate? Diff plate?

Posted: Mon Feb 15, 2010 8:30 pm
by Mr Kleen
I'm down for a rear dif plate.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 7:48 am
by sirwilliam
I am down...I want the thin 1/8" skid plate with cutouts and stinger tail along with the 1/8" diff cover for my '08 Foz.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 10:40 am
by Sabre
Hey Will, you ever going to do headers?

I threw a list up on the first post of what people want.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 10:55 am
by sirwilliam
Sabre wrote:Hey Will, you ever going to do headers?

I threw a list up on the first post of what people want.
Not sure but it won't be anytime soon b/c I will need a retune. Headers will sit in a nice box hiding their prettiness until I decide on something.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 11:34 am
by Sabre
The reason I ask is if you are ever going to do headers, you're going to want to get the "header" version. It adds a couple of bucks.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 12:44 pm
by sirwilliam
Sabre wrote:The reason I ask is if you are ever going to do headers, you're going to want to get the "header" version. It adds a couple of bucks.
Where is that version? I didn't see that on the website.

EDIT: Nevermind...I see it under the WRX/STi for $18 option. I don't think it will be an issue with mine but can you ask if that is an option for the forester, too? If so, I will get that just in case :wink:...so add the stinger and aftermarket headers to mine...thanks!

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 1:40 pm
by complacent
Lemme crunch some numericals. I may very well be in for a plate.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 1:45 pm
by sirwilliam
Julian...what is this "Up Armor" option that you speak of?

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 1:53 pm
by Sabre
I just e-mailed him about your setup Will, I'll let you know what he says :)
UpArmor:
Add $15 to get our rear "Up Armor" that doubles the bottom thickness to a full 1/4" on the rear plate and adds up-turned front and rear lip to the rear diff cover (nice touch and beefy at low weight-under 2 lbs total!)
Colin: Sounds good, just let me know :)

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 1:54 pm
by sirwilliam
Sabre wrote:I just e-mailed him about your setup Will, I'll let you know what he says :)
UpArmor:
Add $15 to get our rear "Up Armor" that doubles the bottom thickness to a full 1/4" on the rear plate and adds up-turned front and rear lip to the rear diff cover (nice touch and beefy at low weight-under 2 lbs total!)
Colin: Sounds good, just let me know :)
Sure I will take up armor, too! :lol:

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 2:41 pm
by Sabre
Ok, added to your order. BTW, I heard back from Paul and he said you did need the header mod, even though it was not listed on the site.

BTW, since this is a group order, it looks like we're going to save quite a bit on shipping!

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 2:56 pm
by sirwilliam
So where are they all being shipped to and how much is shipping? Also, how much are we saving?

Mine looks to be $363 before discounts and shipping...is there tax, too?

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 4:49 pm
by Sabre
We can have them shipped to my house and then I can give them out either at meets or a half way point. No tax as he's in OR.

lol, you need to reread my first post! The UpArmor thing and the savings are in it!
We do currently offer $20 off each plate for orders of 3-5 plates and $25 off orders of 6-9 plates.
He quotes shipped to my door for my order as $369.98. This doesn't include any discounts and the group shipping should drop that a good bit.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 5:10 pm
by complacent
Sabre wrote:We can have them shipped to my house and then I can give them out either at meets or a half way point. No tax as he's in OR.

lol, you need to reread my first post! The UpArmor thing and the savings are in it!
We do currently offer $20 off each plate for orders of 3-5 plates and $25 off orders of 6-9 plates.
He quotes shipped to my door for my order as $369.98. This doesn't include any discounts and the group shipping should drop that a good bit.
In regards to the shipping, would it save to have the group buy shipped to one address? I'd certainly be willing to cost-save that way.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 5:43 pm
by Sabre
Sabre wrote:We can have them shipped to my house and then I can give them out either at meets or a half way point.
lol, you and Will need to read my posts! Yes, we would save a bunch if we ship to one address. I'm perfectly willing to take on that responsibility and Paul prefers that anyway since it makes it easier on him.

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 6:06 pm
by Mr Kleen
Hey, why don't we get a group buy together?


:leaving:

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 6:16 pm
by Sabre
Mr Kleen wrote:Hey, why don't we get a group buy together?
:leaving:
:moon: :moon: :violent: :violent:

Re: Skid plate? Diff plate?

Posted: Tue Feb 16, 2010 8:50 pm
by TRANS4M
when is the deadline? I want to make sure I have a wrx before I buy parts for it :lol:

Re: Skid plate? Diff plate?

Posted: Wed Feb 17, 2010 8:54 am
by sirwilliam
TRANS4M wrote:when is the deadline? I want to make sure I have a wrx before I buy parts for it :lol:
Hurry up already! :lol:

BTW, congrats on selling the S4...it was a very sweet ride and will be missed, though.

Re: Skid plate? Diff plate?

Posted: Wed Feb 17, 2010 10:33 am
by complacent
Sabre wrote:
Sabre wrote:We can have them shipped to my house and then I can give them out either at meets or a half way point.
lol, you and Will need to read my posts! Yes, we would save a bunch if we ship to one address. I'm perfectly willing to take on that responsibility and Paul prefers that anyway since it makes it easier on him.
:oops: :crazy:

Re: Skid plate? Diff plate?

Posted: Wed Feb 17, 2010 10:49 am
by sirwilliam
Sabre wrote:
Sabre wrote:We can have them shipped to my house and then I can give them out either at meets or a half way point.
lol, you and Will need to read my posts! Yes, we would save a bunch if we ship to one address. I'm perfectly willing to take on that responsibility and Paul prefers that anyway since it makes it easier on him.
I was a little confused on discount per plate...so if I got a front skid plate and rear diff plate that would be discount for each or discount total for order...but since it is the full armor kit which is already discounted so I didn't know how much discount for that...did that make sense?

Re: Skid plate? Diff plate?

Posted: Wed Feb 17, 2010 11:02 am
by Sabre
Yes :) Not sure, we'll find out. Let's just say the discount will be less than what we're looking at paying alone, haha.

TRANS4M: No real deadline. I'd like to get this ordered by next Wednesday if I could though.

Re: Skid plate? Diff plate?

Posted: Wed Feb 17, 2010 1:54 pm
by TRANS4M
I dont think I'll be ready by then. Looks to be an awesome product though.

Re: Skid plate? Diff plate?

Posted: Mon Feb 22, 2010 1:06 pm
by Sabre
Placing order tomorrow. If anyone else wants in or wants to change their order, let me know ASAP.