Cereb Daithi's Open Class Rally Car

Post by **Sabre** » Sun Mar 14, 2010 6:13 pm

Those are some pretty welds!

Raven · Post by **Raven** » Sun Mar 14, 2010 10:30 pm

What in the world are you welding that for?

Cereb Daithi · Post by **Cereb Daithi** » Sun Mar 14, 2010 11:03 pm

I don't follow... what are you talking about exactly?

Post by **Sabre** » Mon Mar 15, 2010 12:35 am

Raven wrote:What in the world are you welding that for?

Structural reinforcement

Post by **complacent** » Mon Mar 15, 2010 10:35 am

Raven wrote:What in the world are you welding that for?

Just hazarding a guess here, but possibly to provide reinforced, level mounts for the cage? Looks like an anchor point to me...

Raven · Post by **Raven** » Mon Mar 15, 2010 10:59 am

complacent wrote:Just hazarding a guess here, but possibly to provide reinforced, level mounts for the cage? Looks like an anchor point to me...

Very interesting, I've never built a race car or anything like this so I'm pretty clueless.

sirwilliam · Post by **sirwilliam** » Mon Mar 15, 2010 11:49 am

Lookin' good

...so are the payments in installments...is that why the progress is slow?...and should we expect this car to be done prior to the Mayan calendar running out?

Cereb Daithi · Post by **Cereb Daithi** » Mon Mar 15, 2010 4:03 pm

No payments. I gave him a large deposit to get everything going and I'll be billed the remainder when it's completed. The delays are due to health concerns for Andrew. There is something up with his throat and they were concerned about cancer. It seems that is not the case but they're not sure what is going on. He's back in action now though so things should be speeding up again.

Cereb Daithi · Post by **Cereb Daithi** » Tue Mar 16, 2010 5:16 pm

First page updated

More on it's way soon

Post by **complacent** » Tue Mar 16, 2010 7:17 pm

That's quite a poop-sheet, promises to be an impressive build.

Cereb Daithi · Post by **Cereb Daithi** » Thu Mar 25, 2010 12:06 am

Main hoop going in.

Mr Kleen · Post by **Mr Kleen** » Thu Mar 25, 2010 7:18 am

glad to see things getting back on track. (no pun) keep the pix coming.

Cereb Daithi · Post by **Cereb Daithi** » Fri Apr 02, 2010 11:09 pm

A few updates. Looks like the rest of the cage is now going to be TIG welded instead of MIG. The A bar mockups are done and should be in the car shortly. A lot of effort went into the design of it to produce the high level of quality this build will demand. Now that that is out of the way progress should start to pick up momentum.

A new intercom system being developed by an acquaintance of mine that is going to be superior to most anything on the market could be in the works. It would produce a higher quality sound than what is currently offered, allow audio out for cameras, and support a 2-meter HAM radio in/out.

And possibly most interesting of all I also have a lead on a custom LCD race display that has roots in FSAE and just might be what I've been looking for! That will require some further investigation before I start setting plans into motion for something like that.

More info and pics to come soon.

Post by **Sabre** » Sat Apr 03, 2010 2:11 pm

Cereb Daithi wrote:More info and pics to come soon.

PLEASE! Sounds awesome!

Cereb Daithi · Post by **Cereb Daithi** » Sat Apr 03, 2010 7:33 pm

Theres my GC in the garage... and there's Ken Block's wheels? Interesting...

....but no. Sorry, not what you think. Had you there for a second though didn't I?

prorallycodriver · Post by **prorallycodriver** » Sun Apr 04, 2010 12:07 am

Cereb Daithi wrote:A new intercom system being developed by an acquaintance of mine that is going to be superior to most anything on the market could be in the works. It would produce a higher quality sound than what is currently offered, allow audio out for cameras, and support a 2-meter HAM radio in/out.

An important aspect for the rally application is that they are properly muffled to block out all other sounds. Its way loud in rallycar w/ engine, straightcut gears and the bottom being blasted with gravel.

Cereb Daithi · Post by **Cereb Daithi** » Sun Apr 04, 2010 12:13 am

The actual headsets and helmet are Stilos. It's just the amp itself that is what is being designed.

Cereb Daithi · Post by **Cereb Daithi** » Tue Apr 06, 2010 8:03 pm

Some stats about the features in the new intercom that is being developed:

- Driver In/Out
- Co-Driver In/Out
- HAM Radio In/Out (Input Isolated by a 1:1 audio isolation transformer)
- Aux In (for a iPod or MP3 player)
- Aux Out (for the video cameras)
- Aux 2 Out
- Compressor/Limiter on each channel (will compress both driver and co-driver channels at the same time. Compression/Limiting is used to reduce the levels of the peaks that way you can have it loud but not get your ears blown out when your co-driver/driver decides to yell outside the car)
- Independent volume control over Co-driver and Driver channels. No more driver turning up volume and then the Co-driver channel gets louder.
- 50/50 split of volume over driver and co-driver. HAM Radio would have the same volume when used as well.
- Both driver and co-driver MICs will be heard over the HAM Radio Out.
- LED for Power Status (On/Off)

Cereb Daithi · Post by **Cereb Daithi** » Wed Apr 07, 2010 7:41 am

Parts are now starting to get ordered! The new intercooler has already arrived.

(Stock WRX intercooler shown for comparison)

Post by **Sabre** » Wed Apr 07, 2010 8:41 am

She's a biggin!

Cereb Daithi · Post by **Cereb Daithi** » Wed Apr 07, 2010 9:16 am

You're to thank for it. I got it off that link you posted in the "I think my engine is dead" thread.

I was a bit wary of an E-Bay TMIC but my engineer assured me theyre legit. Now that it's here and I'm looking at it.. I'm quite pleased with the bang for my buck. It's a very high quality product it looks like. Great welds. Solid looking.

Mr Kleen · Post by **Mr Kleen** » Wed Apr 07, 2010 11:19 am

About the same size as my AVO TMIC.

Post by **Sabre** » Wed Apr 07, 2010 10:40 pm

Cereb Daithi wrote:You're to thank for it. I got it off that link you posted in the "I think my engine is dead" thread.

Oh crap, you got that one? I heard it was made out of Burmese soda cans!

Glad you were able to save some dough!

Cereb Daithi · Post by **Cereb Daithi** » Thu Apr 08, 2010 9:53 am

Sabre wrote: Oh crap, you got that one? I heard it was made out of Burmese soda cans!

Well if it turns out to be shite at least I know who to hold responsible!

Post by **complacent** » Thu Apr 08, 2010 11:08 am

Sabre wrote: Oh crap, you got that one? I heard it was made out of Burmese soda cans!

I can't believe that thread has lasted for as long as it has. I think I put some of the first pics on there...

DCAWD.com

Cereb Daithi's Open Class Rally Car

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe