Cereb Daithi's Open Class Rally Car
Moderator: Moderators
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
I'm proud to announce a sponsorship from Moore Performance & Race Parts! Very excited about the opportunity to run a custom exhaust tailored to exactly the specs I want and need.
Moore Performance & Race Parts
A little more info on the exhaust. I have a few options on what I could do but I'm going with this setup for now:
3 inch exhaust with just simple 3 inch tip
The EWG downpipe will also be fabbed up with this batch
This is a great exhaust sponsorship becuase it allows me to modify things as needed. The exhaust is very easy to work on and VERY modular. I can add resonators/cats in as necessary if noise requirements dictate so.
Moore Performance & Race Parts
A little more info on the exhaust. I have a few options on what I could do but I'm going with this setup for now:
3 inch exhaust with just simple 3 inch tip
The EWG downpipe will also be fabbed up with this batch
This is a great exhaust sponsorship becuase it allows me to modify things as needed. The exhaust is very easy to work on and VERY modular. I can add resonators/cats in as necessary if noise requirements dictate so.
-
- DCAWD Groupie
- Posts: 1659
- Joined: Fri Nov 19, 2004 7:00 pm
- Location: washington, dc
- Contact:
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Would anyone be interested in a 2006 WRX transmission with PPG straight cut gears and selector forks? The PPG internals have 0 miles on them. Possibly looking at a 6-speed dogbox. Super strong case, gears, and very quick shifts.
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: EJ205 GC Coupe
Very cool!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
I'm very happy to welcome on Engaged Performance as a sponsor! Their PnP and coating services are quality and I'm happy to have them on-board
Among other things the entire exhaust system (header to exhaust tip) will receive a full thermal coating. Stay tuned for more.
Among other things the entire exhaust system (header to exhaust tip) will receive a full thermal coating. Stay tuned for more.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Talked with an acquaintance of mine from DC Shoes. It looks like once the car is completed it will be paired up with some more local (Mid-Atlantic Region) DC Shoes promos. It'll be parked outside to whip up the rally fanbois. Looks like things are starting to pick up!
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: EJ205 GC Coupe
Dude, you've been blessed by some kind of witch doctor! This is looking like an awesome build!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Eh. Considering all the other problems and set-backs I think maybe this might break even
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: EJ205 GC Coupe
lol, agreed!Cereb Daithi wrote:Eh. Considering all the other problems and set-backs I think maybe this might break even
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- zaxrex
- DCAWD Founding Member
- Posts: 6350
- Joined: Mon Sep 06, 2004 8:00 pm
- Location: asiandale
Re: EJ205 GC Coupe
Both, if you have them. I just need to see how the under tray and liners sit together, so under tray condition is not oo important.Cereb Daithi wrote:Both fender liners or just one?
I think the under-tray is still good.
Patience is the ability to idle your motor when you feel like stripping your gears
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
First page updated.
The girl decided she wants to contribute to my safety and sort of let slip one of her Christmas presents for me this year as well.
I think i found a keeper... lol
The girl decided she wants to contribute to my safety and sort of let slip one of her Christmas presents for me this year as well.
I think i found a keeper... lol
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: EJ205 GC Coupe
Indeed you did!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Fresh out of the oven!
- sirwilliam
- Resident Poop Expert
- Posts: 7226
- Joined: Mon Aug 01, 2005 1:27 pm
- Location: The Wild Serengeti Suburbs
Re: EJ205 GC Coupe
Getting excited for ya!
I had a daydream today where I had a built STi block and tranny made of titanium...pretty sweet dream.
I had a daydream today where I had a built STi block and tranny made of titanium...pretty sweet dream.
2004 SG Model A PearlBlackObsidian (RIP)
2008 SG Model D BlueRallyWorld
"When I get sad, I stop being sad and be awesome instead. True story." -Barney Stinson
"Nothing shuts my pie-hole but pie." -Shawn Spencer
2008 SG Model D BlueRallyWorld
"When I get sad, I stop being sad and be awesome instead. True story." -Barney Stinson
"Nothing shuts my pie-hole but pie." -Shawn Spencer
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Just an update. Work continues on the GC (slowly). Now that the holidays are over things should resume and I should be getting some new progress pics up over the course of the next few weeks.
-
- DCAWD Groupie
- Posts: 1316
- Joined: Sun Oct 01, 2006 3:48 pm
- Location: Arlington, VA
- Contact:
Re: EJ205 GC Coupe
It's easier to manage when you put all of this data into excel or visio. Basically you have to prioritize things. And also some semblance of work that needs to be sequential instead of linear. A common problem with this is you have an engine sitting on the stand. You have two items (work on the new engine, remove the old engine, and install the engine) that have to be installed in a certain way. I've got the spreadsheet for the Z if you want it. it's my last name at gmail.
Aside, best of luck. From where I sit this looks to be a multi-year project. Persevere and get money.
Aside, best of luck. From where I sit this looks to be a multi-year project. Persevere and get money.
rocket scientist
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
The time-frame is unknown really. It'll take however long it takes really. I might use the excel idea.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Slight change in the plan. Looks like I'll be running Ver 5/6 Type RA cams instead of the Crowers. This is mainly a money-saving decision. I'm getting the RA cams for next to nothing and it will still be able to give me a high revving motor.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Some new pics for you guys
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
It's tough to see in those pics but the original seat mounting points have also been removed. You can see them laying on the ground in the 3rd pic. New (better) ones are getting welded in.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Very minor update. Trimming the last of the fat off the interior. Preventing any places for water or any debris to hide behind/under. This might seem like overkill to some but the attention to detail aspect of this build is important to me. Everything in the pics is coming off.
Rear seat reinforcements
Console bracket (plus you can see the newly welded floor plugs) Fabbing our own bracket to mount the CF dash
Floorpan and wheel well plates
Again, nothing exciting. Just the last of the stripping before Andrew starts bending metal and it starts to look more like a rally car!
Rear seat reinforcements
Console bracket (plus you can see the newly welded floor plugs) Fabbing our own bracket to mount the CF dash
Floorpan and wheel well plates
Again, nothing exciting. Just the last of the stripping before Andrew starts bending metal and it starts to look more like a rally car!
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
New goodies just arrived.
Ver. 6 STi Type RA cams
Ver. 6 STi Type RA cams
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: EJ205 GC Coupe
Nice! What's the specs on those?
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Same adv with longer dur. Can't remember the number off the top of my head. It combined with the improved valves/springs and the already built shortblock it will allow me to rev the motor out past 8k
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
Re: EJ205 GC Coupe
Andrew is back from Hungary so the work can resume!