Page 1 of 1

To Snorkus or not to Snorkus?

Posted: Tue Oct 11, 2005 8:24 pm
by GeneralGrievous
I'm assuming most of you out there have completed or at the very least considered this mod. I've found some pretty good faqs/dyi's on forums but figured I'd ask the ALL KNOWING ONES here at DCAWD their takes. I'm cool with keeping the factory airbox (already have a K&N drop in) instead of a short intake if I get pretty much the same result.

I guess I just cant keep my hands to myself (as far as the car is concerned) :P

Posted: Tue Oct 11, 2005 9:10 pm
by complacent
<triumph>do eeeet</triumph>

seriously, it's easy, quick and there is a difference. totally worth it.... i've done it to both my subys now. ;)

Posted: Tue Oct 11, 2005 9:41 pm
by Sabre
Ya, it's a 15 minute job and worth doing :) If you get the chance... come to the dyno day and we can do it right there on the spot :) I'll just be standing around watching the cars anyway.

Posted: Wed Oct 12, 2005 11:14 am
by Mr Kleen
you already know my opinion on the subject. but if you like a quiet car don't do it, not worth it.

Posted: Wed Oct 12, 2005 1:47 pm
by gsx-lex
If you are refereing to a cold air intake snorkel, here is a DYI I made a little while back. Obviously, we drive two differnt cars but I think that ever turbo car should have one! I have seen temperatures at te MAS drop 40 deg on days where it's 90 deg outside!

http://ziptiebandit.com/WordPress/?page_id=38

Posted: Wed Oct 12, 2005 1:59 pm
by Mr Kleen
a 3" PVC elbow will fit right in the WRX factory air box if you remove the rubber seal at the bottom. it's easier to show than to explain but I don't have any pictures. I recommend black PVC to make it look all nice and factory but white PVC is hard to notice if you can't find black. I painted my white pipe to help hide it.

Posted: Wed Oct 12, 2005 10:15 pm
by GeneralGrievous
Many thanks....my tab of owed beers grows daily..

Will hopefully get it done before Saturday but who knows....

What do you think about the "snorkus remover" option at Mach V? I guess it just connects the airbox directly to the ram air intake once the silencer is removed...

Posted: Wed Oct 12, 2005 10:52 pm
by Mr Kleen
GeneralGrievous wrote:Many thanks....my tab of owed beers grows daily..

Will hopefully get it done before Saturday but who knows....

What do you think about the "snorkus remover" option at Mach V? I guess it just connects the airbox directly to the ram air intake once the silencer is removed...
stop by the dyno day this Saturday and we'll rip that bad boy out. I didn't buy a "remover" and I'm a bit of a perfectionist about how I modify my car. ask Zack. :wink:

Posted: Thu Oct 13, 2005 10:02 am
by hotsam
GeneralGrievous wrote:Many thanks....my tab of owed beers grows daily..

Will hopefully get it done before Saturday but who knows....

What do you think about the "snorkus remover" option at Mach V? I guess it just connects the airbox directly to the ram air intake once the silencer is removed...
Are you talking about the GPMoto piece?

Image

It's pretty slick ;)

Posted: Thu Oct 13, 2005 10:25 am
by zaxrex
Yeah, I think Gabe and I are at opposite ends of the spectrum.

Posted: Thu Oct 13, 2005 11:24 am
by Mr Kleen
zaxrex wrote:Yeah, I think Gabe and I are at opposite ends of the spectrum.
no, I would say we're the opposite sides of the same coin. 8)

Posted: Thu Oct 13, 2005 5:56 pm
by GeneralGrievous
Well the deed is done.... Grievous 1- Snorkus 0... 8)

Not at all as bad as I thought it would be, took me like 20 minutes. Will still try to make Saturday just to gawk and such....

Posted: Thu Oct 13, 2005 6:16 pm
by GeneralGrievous
And yes Hotsam... thats exactly the piece I meant...

I'm sure I'll do the PVC thing instead, but now on my way to Home Depot I'm rocking the ghetto-fabulous duct tape "gasket/plug" thing... :shock:

Posted: Thu Oct 13, 2005 11:04 pm
by Mr Kleen
I think the plug is only $3 from SubyGal (of NASIOC fame) but it's late and I'm lazy. :wink: I hope you can make it out so we can meet in person. if not then, then the next HT meet.