rally armor mud flaps
Moderator: Moderators
-
- Moderator
- Posts: 6314
- Joined: Wed Oct 19, 2005 1:15 am
- Location: Alexandria
rally armor mud flaps
i'm considering picking up a set.
any advantage to the more expensive urethane flaps vs. the "classic" ones? i have my eye on the classic set with blue lettering found here. i just want a set that will hold up through the seasons.
anyone w/ these care to chime in? gabe?
any advantage to the more expensive urethane flaps vs. the "classic" ones? i have my eye on the classic set with blue lettering found here. i just want a set that will hold up through the seasons.
anyone w/ these care to chime in? gabe?
-Ben
- complacent
- DCAWD Founding Member
- Posts: 11651
- Joined: Sun Aug 29, 2004 8:00 pm
- Location: near the rockies. very.
- Contact:
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Ya, I dig the mud flap look as well
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- Mr Kleen
- DCAWD Founding Member
- Posts: 15034
- Joined: Mon Apr 18, 2005 6:46 pm
- Location: Wiesbaden.DE
-
- Moderator
- Posts: 6314
- Joined: Wed Oct 19, 2005 1:15 am
- Location: Alexandria
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
- Mr Kleen
- DCAWD Founding Member
- Posts: 15034
- Joined: Mon Apr 18, 2005 6:46 pm
- Location: Wiesbaden.DE
-
- I'm a n000b
- Posts: 12
- Joined: Thu Jul 19, 2007 7:14 pm
Thanks for the kind words everyone
Kleen you have one of the very first sets we began producing many years ago, and quite a few revisions have taken place since then. The current version (V4) of the classic series is about an inch higher off the ground to compensate for for a variety of suspension conditions, with a different hardware setup (stainless steel/plastic)
Ben to answer you question -The UR series flaps are made of same premium urethane sheeting which we provide for rally use to various motosports teams we work with:
Except in a street version variety as shown:
Owners of lowered vehicles can take advantage of the "flex factor" of the "UR's" which is inherent in the physical properties of urethane as well as the both ends of extreme temperatures. The UR limited is also highly reccomended for sport use as they flex and yield as necessary as conditions require yet maintain their form without the excessive "curling" effects seen in some of the generic mud flaps. The URs are also priced at almost half the cost of any other type of true bolt on urethane flap.
We also have some additional rally flap information on our FAQ page found here:
http://www.rallyarmor.com/store/mudflap_faq.php
As always, if anyone has any questions, feel free to give us a call during business hours, or email to sales@rallyarmor.com
Thanks again for everyones support
Team R/A
Kleen you have one of the very first sets we began producing many years ago, and quite a few revisions have taken place since then. The current version (V4) of the classic series is about an inch higher off the ground to compensate for for a variety of suspension conditions, with a different hardware setup (stainless steel/plastic)
Ben to answer you question -The UR series flaps are made of same premium urethane sheeting which we provide for rally use to various motosports teams we work with:
Except in a street version variety as shown:
Owners of lowered vehicles can take advantage of the "flex factor" of the "UR's" which is inherent in the physical properties of urethane as well as the both ends of extreme temperatures. The UR limited is also highly reccomended for sport use as they flex and yield as necessary as conditions require yet maintain their form without the excessive "curling" effects seen in some of the generic mud flaps. The URs are also priced at almost half the cost of any other type of true bolt on urethane flap.
We also have some additional rally flap information on our FAQ page found here:
http://www.rallyarmor.com/store/mudflap_faq.php
As always, if anyone has any questions, feel free to give us a call during business hours, or email to sales@rallyarmor.com
Thanks again for everyones support
Team R/A
Rally Armor LLC
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
-
- Moderator
- Posts: 6314
- Joined: Wed Oct 19, 2005 1:15 am
- Location: Alexandria
- Mr Kleen
- DCAWD Founding Member
- Posts: 15034
- Joined: Mon Apr 18, 2005 6:46 pm
- Location: Wiesbaden.DE
and I'm keepin'em until they're worth a FORTUNE!!Rallyarmor wrote: Kleen you have one of the very first sets we began producing many years ago...
you guys have any plans on making aux/rally light mounting bars?
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
-
- I'm a n000b
- Posts: 12
- Joined: Thu Jul 19, 2007 7:14 pm
Thanks again everyone
We have made custom one off light mounts in the past, (which were actually extensions of our skid plates) although currently we do not have immediate plans to release.
We are going to be stocking Hella lighting in the next few weeks, as well as releasing some great new Rallyarmor products
We have made custom one off light mounts in the past, (which were actually extensions of our skid plates) although currently we do not have immediate plans to release.
We are going to be stocking Hella lighting in the next few weeks, as well as releasing some great new Rallyarmor products
Rally Armor LLC
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
- complacent
- DCAWD Founding Member
- Posts: 11651
- Joined: Sun Aug 29, 2004 8:00 pm
- Location: near the rockies. very.
- Contact:
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
^^^ Agreed, thanks for joining and answering our questions!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
-
- I'm a n000b
- Posts: 12
- Joined: Thu Jul 19, 2007 7:14 pm
No problem at all
Thanks for the warm welcome!
Thanks for the warm welcome!
Rally Armor LLC
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
I actually have a question. Do you do any custom fab work? I know you said you had some things already that weren't being released, but would you take special orders? I'm looking for a skid-plate lightbar setup, but I'm looking for something more like the rallyinnovations car
I like that extra bit of front protection it provides.
I'm waiting on a response from them about making one to fit an 05, but I'd also love to check with you guys since i've only ever heard good things.
I like that extra bit of front protection it provides.
I'm waiting on a response from them about making one to fit an 05, but I'd also love to check with you guys since i've only ever heard good things.
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
-
- I'm a n000b
- Posts: 12
- Joined: Thu Jul 19, 2007 7:14 pm
Still here
Well see if we could dig up those pics of the extension we had created. It had multiple settings on it to compensate for all the differences in the bumpers throughout the years.
Well see if we could dig up those pics of the extension we had created. It had multiple settings on it to compensate for all the differences in the bumpers throughout the years.
Rally Armor LLC
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
- Cereb Daithi
- DCAWD Groupie
- Posts: 3747
- Joined: Wed Apr 26, 2006 11:07 pm
- Location: Pittsburgh, PA
- Contact:
-
- I'm a n000b
- Posts: 12
- Joined: Thu Jul 19, 2007 7:14 pm
No problem, the URs are an excellent product and we are sure you will be pleased as we have had nothing but great feedback with them.Cereb Daithi wrote:Sounds very good! Perhaps I'll be placing an order for that as well as some mudflaps as well shortly
in regards to the light mount, we did have a plate extension that bolted to the front rallyarmor skid plate bolts:
We've been scouring the previous site backups for the images, we'll post as soon as we find them! (site was redesigned earlier this year)
Rally Armor LLC
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
-
- I'm a n000b
- Posts: 12
- Joined: Thu Jul 19, 2007 7:14 pm
Finally found it
Rally Armor LLC
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
http://www.rallyarmor.com
Email sales@rallyarmor.com
Phone: 917.463.4820
Fax: 866.812.9237
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Wow, that looks nice! Hmm.... it's making me think more and more about picking up one of these....
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.