FSTi exhaust manifold the same as USDM STi exhaust manifold
Posted: Thu Jul 27, 2006 11:52 am
This would be for the '04-'05 years. Let me know. Thanks.
DCAWD.com
DC All Wheel Drive
https://forums.dcawd.com/
FSTi exhaust manifold the same as USDM STi exhaust manifold
Page 1 of 1
Posted: Thu Jul 27, 2006 12:07 pm
If you're talking about a USDM Forrester, yes. If you're talking about a REAL FSTi, then I have no clue.
Posted: Thu Jul 27, 2006 12:18 pm
Talking about the JDM Forester STisabre wrote:If you're talking about a USDM Forrester, yes. If you're talking about a REAL FSTi, then I have no clue.
Posted: Thu Jul 27, 2006 3:02 pm
make sure it is throttle by wire... the bolt patterns for cable-driven and tbw manifolds are VERY different...
(ask marco how i know
)
(ask marco how i know
)Posted: Thu Jul 27, 2006 3:06 pm
What you can't tell me?complacent wrote:make sure it is throttle by wire... the bolt patterns for cable-driven and tbw manifolds are VERY different...
(ask marco how i know
I have already been bugging Marco all day.Posted: Thu Jul 27, 2006 3:08 pm
ask him about the time i helped him swap out his td04 and such for the vf39 and USDM STi manifold...
tools were flight-tested... believe me. good times.
tools were flight-tested... believe me. good times.
Posted: Thu Jul 27, 2006 3:14 pm
You do realize we are talking about exhaust manifold, correct? I just realized you were talking about the intake manifold.complacent wrote:ask him about the time i helped him swap out his td04 and such for the vf39 and USDM STi manifold...
tools were flight-tested... believe me. good times.
Posted: Thu Jul 27, 2006 3:16 pm
whoops... duh.
errrr.....
ummmmm......
yea, i gots nothing.
(they should both fit just fine, so long as it isn't a twinscroll pipe)
*slinks away, whistling*
errrr.....
ummmmm......
yea, i gots nothing.
(they should both fit just fine, so long as it isn't a twinscroll pipe)
*slinks away, whistling*
Posted: Thu Jul 27, 2006 6:16 pm
From everything I've read the exhaust manifolds on all the WRX/STi/Forester/LegacyGT USDM/JDM are all the same. Same diameter, same length, everything (except the twin turbo and twin scroll models).
Posted: Thu Jul 27, 2006 6:29 pm
You sir are wrong! FYI, the manifolds have different curves and different unconstant ID and OD throughout. Even the USDM '04 and '05 STi manifolds are slightly different.drwrx wrote:From everything I've read the exhaust manifolds on all the WRX/STi/Forester/LegacyGT USDM/JDM are all the same. Same diameter, same length, everything (except the twin turbo and twin scroll models).