Page 1 of 1

Spaze's big ass FS thread

Posted: Thu May 25, 2006 8:54 am
by spazegun2213
Ok, so here is the deal, the sti will once again turn back into a street car permenently. This means I'm going to be selling all my track stuff. here is an initial list of things.

The list:
RCE KBK $225
1 set of re70's 6K miles, and are in good condition $350 obo
1 set of WELL used 70's $100
1 set of 5zigen FN01RC's 17x8 et 35 $450
1 set of rota turques 17x8 et?? $550
1 set of pagid blue pads (front and rear) (60% pad left) $300
gruppe-s light weight bumper beam $70

I think thats about it...

Posted: Thu May 25, 2006 10:10 am
by complacent
i'm really hung up on the 5zigens, but worried about teh offset. did you get a chance to track them with the springs on? any rubbing in the rear? what with tires were you using? did they stick out like a jeep with 33inch super-swampers?

what's the capitol of malaysia?

Posted: Thu May 25, 2006 10:11 am
by Mr Kleen
Kuala Lumpur

Posted: Thu May 25, 2006 10:27 am
by complacent
Mr Kleen wrote:Kuala Lumpur
grrrr....

Image

Posted: Thu May 25, 2006 10:48 am
by spazegun2213
complacent wrote:i'm really hung up on the 5zigens, but worried about teh offset. did you get a chance to track them with the springs on? any rubbing in the rear? what with tires were you using? did they stick out like a jeep with 33inch super-swampers?

what's the capitol of malaysia?
they fit perfectly in the front, no rubbing at ALL! I race on them so i would have heard/felt/seen something. I have not tried them on the rear, but I'm 70% sure they will fit, i need to test fit them anyway. I have swift springs, 30mm drop all around. and i was using the stockers. and they look like you have 8.5 in rims, as in they look wider, but they dont stick out.

Posted: Thu May 25, 2006 10:55 am
by complacent
are there any tires mounted on them right now? i'd be curious to test them out (for fitment of course)

Posted: Thu May 25, 2006 11:00 am
by sirwilliam
I am sorry but this thread is not big

Image

Posted: Thu May 25, 2006 11:24 am
by spazegun2213
complacent wrote:are there any tires mounted on them right now? i'd be curious to test them out (for fitment of course)
kinda... i have the well used set on 2 5zigens and 2 rotas

what springs do you have?

Posted: Thu May 25, 2006 11:26 am
by complacent
tanabes. so i could at least mount them on the rear axles... that would be my biggest concern anyways.

Posted: Thu May 25, 2006 11:41 am
by spazegun2213
complacent wrote:tanabes. so i could at least mount them on the rear axles... that would be my biggest concern anyways.
yea, thats why i Only ran them in the front.. cux the rear looked close.

Posted: Tue May 30, 2006 8:58 am
by spazegun2213
alright, i put up the FS thread on a few other boards, so if you all want something let me know ASAP!

thanks!

Posted: Tue May 30, 2006 9:12 pm
by spazegun2213
anyone for the KBK? if not them I'm selling them to another person.

Posted: Tue May 30, 2006 9:32 pm
by Sabre
I'm not first in the list, so I can't comment.... Wait for the others to chime in. BTW, do you know if this works with fogs?

Posted: Tue May 30, 2006 10:11 pm
by spazegun2213
sabre wrote:I'm not first in the list, so I can't comment.... Wait for the others to chime in. BTW, do you know if this works with fogs?
sure does, you need some home depot hosing, but you are set.. as long as you have fog covers.

Posted: Tue May 30, 2006 10:18 pm
by Sabre
spazegun2213 wrote:
sabre wrote:I'm not first in the list, so I can't comment.... Wait for the others to chime in. BTW, do you know if this works with fogs?
sure does, you need some home depot hosing, but you are set.. as long as you have fog covers.
Why would fog covers matter?

Posted: Sun Jun 04, 2006 9:08 pm
by spazegun2213
sabre wrote:
spazegun2213 wrote:
sabre wrote:I'm not first in the list, so I can't comment.... Wait for the others to chime in. BTW, do you know if this works with fogs?
sure does, you need some home depot hosing, but you are set.. as long as you have fog covers.
Why would fog covers matter?
cuz the stockers dont have holes in them to feed the kit.

Posted: Mon Jun 05, 2006 8:26 am
by spazegun2213
added the light weight bumper beam