Page 2 of 4
Posted: Fri Mar 03, 2006 5:31 pm
by complacent
Darrin is going to have to check on the bleeder screw size before he can order.
I'll order mine now if we're going to order separately. Speak up and be hurrd!
Posted: Fri Mar 03, 2006 7:22 pm
by Sabre
I'm in for order seperately, just makes life easier
Posted: Fri Mar 03, 2006 7:31 pm
by complacent
cool, on my way to the site in a few.
Posted: Fri Mar 03, 2006 7:32 pm
by drwrx
My fronts are 10mm my backs are 8mm (I always have to be difficult).
We might as well buy seperately since mine is going to be a bit of a odd order.
Posted: Fri Mar 03, 2006 8:20 pm
by drwrx
It looks like Oakos adds another $28 to the cost of the Speed bleeders for STi brembos. That puts the purchase price to nearly $150 for you STi guys. I'm still trying to find out whether I need different lines for my stock rears and STI fronts.
Posted: Fri Mar 03, 2006 8:41 pm
by Sabre
ok, silly question... are the ones from Oakos coated in plasic? Check these out:
http://store.yahoo.com/mauromotorsports ... ifran.html
I tried calling Oakos, but no one answered
Posted: Fri Mar 03, 2006 8:44 pm
by complacent
Yea, but with free shipping it's still cheaper than Mach V. I'm going to order today.
Posted: Fri Mar 03, 2006 8:53 pm
by drwrx
I'm not certain the coating matters. It's more for looks than anything else. The set I had on my Galant were totally bare and I never had an issue with them.
I have a couple of e-mails out for info on lines and speed bleeders for my set-up. I may be SOL on the speed bleeders.
Posted: Fri Mar 03, 2006 8:55 pm
by drwrx
Also, if your just going for the cheapest price, and your ditching the speed bleeders, JSC Speed is $79 for the Techna Fit.
Posted: Fri Mar 03, 2006 9:14 pm
by Sabre
Ordering now
Posted: Fri Mar 03, 2006 9:15 pm
by Sabre
drwrx wrote:I'm not certain the coating matters. It's more for looks than anything else. The set I had on my Galant were totally bare and I never had an issue with them.
I have a couple of e-mails out for info on lines and speed bleeders for my set-up. I may be SOL on the speed bleeders.
All I needed to hear
Posted: Fri Mar 03, 2006 9:40 pm
by complacent
ordered fluid and lines/bleeders.
wewt.
Posted: Fri Mar 03, 2006 9:47 pm
by Sabre
bluscooby23 wrote:ordered fluid and lines/bleeders.
wewt.
+1
Posted: Fri Mar 03, 2006 9:50 pm
by drwrx
Fine, fine, rub it in my face.
I have to wait, bastards!
Posted: Fri Mar 03, 2006 9:53 pm
by spazegun2213
hmm you all should have started a GB for them
Posted: Fri Mar 03, 2006 10:01 pm
by Sabre
drwrx wrote:Fine, fine, rub it in my face.
I have to wait, bastards!
Waiting to hear back what you need?
Ross: Naa, I want them now
Posted: Fri Mar 03, 2006 10:03 pm
by complacent
peer pressure is such an evil thing... <dr evil>muuaahh haaa haaa haaa</dr evil>
Posted: Fri Mar 03, 2006 10:25 pm
by drwrx
sabre wrote:drwrx wrote:Waiting to hear back what you need?
I'd like to get the Goodridge lines and speed bleeders together, but sice I have Brembos up front and stock in back and they don't have a order option for that. Also, I want to make sure that the Goodridge lines will fit with my stock rear/brembo front set-up, or do I need to buy a front lines for STi and back lines for WRX?
Posted: Fri Mar 03, 2006 10:26 pm
by Sabre
I'm going to presume that you need STI ones up front and WRX ones in the rear. I take it you have called/e-mailed them to ask?
Posted: Fri Mar 03, 2006 10:31 pm
by drwrx
Yep, called (no answer) and e-mailed (no response yet)
Posted: Fri Mar 03, 2006 10:35 pm
by complacent
Yea, they don't have an option for two up front and one in the back.
Speed bleeders you pervs!
Posted: Fri Mar 03, 2006 11:35 pm
by zaxrex
You all know how I like messing with things...
http://cgi.ebay.com/ebaymotors/G-STOP-H ... dZViewItem
You know, just in case everythings was all figured out & such...
Posted: Sat Mar 04, 2006 12:22 am
by complacent
Thanks Z.
*Lights $40 on fire*
Posted: Sat Mar 04, 2006 6:15 pm
by Sabre
bluscooby23 wrote:Thanks Z.
*Lights $40 on fire*
Mind if I grab that lighter from ya? <Grabs his cash too>
Posted: Sun Mar 05, 2006 6:04 am
by Mr Kleen
when is the brake party? I'll have some to do myself with a week or 2.