Cereb Daithi's Open Class Rally Car

Cereb Daithi · Post by **Cereb Daithi** » Mon Apr 20, 2009 4:45 pm

Yep. Noise isn't a concern for me. This is in no way anything close to a daily driver.

Cereb Daithi · Post by **Cereb Daithi** » Sat May 23, 2009 8:25 pm

Shek finished up his motor rebuild and got his WRX out of the garage. Got the GC and the WRX in the garage ready to start transferring parts. Work should now start moving much faster.

Post by **Sabre** » Sun May 24, 2009 6:31 pm

Sweet!!!!

Cereb Daithi · Post by **Cereb Daithi** » Mon May 25, 2009 3:59 pm

Phase one is to gut the interior. Front seats are now out and I'm about to go out and get hte back ones. then the center console and carpet.

snaab · Post by **snaab** » Mon May 25, 2009 6:20 pm

Keep up the momentum

Mr Kleen · Post by **Mr Kleen** » Mon May 25, 2009 6:46 pm

snaab wrote:Keep up the momentum

Cereb Daithi · Post by **Cereb Daithi** » Wed May 27, 2009 8:57 am

That's the plan. If I let it stall I suspect it'll just sit there gathering dust for the whole summer. I make it a point to go out and pick up some tools after I get home from work/before I go to bed and when I wake up/before I go to work. Any free time I find in the day to work is a bonus.

sirwilliam · Post by **sirwilliam** » Wed May 27, 2009 9:05 am

Awesome! Keep on truckin'!

Cereb Daithi · Post by **Cereb Daithi** » Thu Jun 04, 2009 12:29 am

Guess I should keep posting updates.

Good bit of the interior is out of the WRX. Still need to finish disconnecting the HVAC and start pulling what's left of the wiring harness. A thought occured to me too: perfect time to do a red bulb swap.

snaab · Post by **snaab** » Thu Jun 04, 2009 1:30 am

That photo is not for the weak of heart!

Post by **Sabre** » Thu Jun 04, 2009 8:14 am

Very good time to do ANYTHING like that

Post by **complacent** » Thu Jun 04, 2009 8:47 am

snaab wrote:That photo is not for the weak of heart!

Where's that 2mm x 10mm screw... you know, the one that holds the hvac cable tensioner to the secondary impact beam brace bracket. It's gotta be around here, somewhere.

Cereb Daithi · Post by **Cereb Daithi** » Sun Jun 07, 2009 3:06 pm

Getting ready to order a few things.

UTEC
Borla Hush Catback
PPG Straight cut gearbox.

The borla hush is for cruising. I'll have an electronic cutout for when i want to be loud but I also want to be able to not have my head explode when I'm curising in 5th with the stock helical.

Post by **Sabre** » Mon Jun 08, 2009 9:12 am

Cereb Daithi wrote:UTEC

Go open source and save your $$$!

Post by **complacent** » Mon Jun 08, 2009 9:59 am

Sabre wrote:
Cereb Daithi wrote:UTEC
Go open source and save your $$$!

This is truth.

Mr Kleen · Post by **Mr Kleen** » Mon Jun 08, 2009 11:43 am

Sabre wrote:Go open source and save your $$$!

no doubt. I was a fan of the AP until I saw the [open source] light.

Cereb Daithi · Post by **Cereb Daithi** » Mon Jun 08, 2009 1:54 pm

It's funny. My buddy does OS tuning and actually recommended I get UTEC because it gives you some more freedom when tuning.

I just picked one up last night for $275. No biggie.

drwrx · Post by **drwrx** » Mon Jun 08, 2009 2:47 pm

complacent wrote:
Sabre wrote:
Cereb Daithi wrote:UTEC
Go open source and save your $$$!
This is truth.

Go Open Source for "base" map and to hide all the codes your going to throw, then build secondary Maps on the UTEC.

You can get outside the UTEC's strength's pretty quickly. Ask me how I know.

Cereb Daithi · Post by **Cereb Daithi** » Mon Jun 08, 2009 3:40 pm

Believe me if I had to pay the full $1k or whatever they are asking for a new one I wouldn't even bother. If I'm dissatisfied I could probably very easily make back the $275 I paid for it. If not.. oh well. On that note. Is anyone interested in the Cobb AP that came with the car? :p

Cereb Daithi · Post by **Cereb Daithi** » Tue Jun 09, 2009 5:12 pm

If everything goes according to plan I'll have the PPG gearbox mid-week next week.

Cereb Daithi · Post by **Cereb Daithi** » Thu Jun 11, 2009 9:02 pm

Little teaser of PPG straight cut goodness

The UTEC just came in the mail today as well. Even threw in yet another boost controller. I'm going to have to start selling these damn things. They are growing almost as rapidly as my collection of turbos

Post by **Sabre** » Sat Jun 13, 2009 9:02 am

That's purdy

Cereb Daithi · Post by **Cereb Daithi** » Sat Jun 13, 2009 8:23 pm

Found one for $4000 shipped with 0 miles on it. Think I'll go with that instead.

sirwilliam · Post by **sirwilliam** » Mon Jun 15, 2009 2:54 pm

Cereb Daithi wrote:Little teaser of PPG straight cut goodness

The UTEC just came in the mail today as well. Even threw in yet another boost controller. I'm going to have to start selling these damn things. They are growing almost as rapidly as my collection of turbos

Awesome!!! And it is even coated in smurf blood! Good man!

Cereb Daithi · Post by **Cereb Daithi** » Tue Jun 16, 2009 7:26 am

Steering column out.

DCAWD.com

Cereb Daithi's Open Class Rally Car

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe

Re: EJ205 GC Coupe