TRANS4M v2.0
Moderator: Moderators
- TRANS4M
- Tricycle
- Posts: 210
- Joined: Mon Jul 31, 2006 4:06 pm
TRANS4M v2.0
At the DCAWD birthday meet, I talked to Matt about finding a 2011 SWP WRX Limited. I believe his exact words were, "If you find that car, buy it". I guess the combination that I wanted was hard to come by since those that have it are holding on to it. So one day after the DCAWD birthday meet I found this car online. I purchased it the following day. Out with the old, in with the new.
First thing that needs to change are the tail lights. I'm looking to get them overlayed with red film. Anyone have experience with that or can recommend a tint shop that does it?
First thing that needs to change are the tail lights. I'm looking to get them overlayed with red film. Anyone have experience with that or can recommend a tint shop that does it?
- drwrx
- DCAWD Founding Member
- Posts: 4382
- Joined: Mon Sep 20, 2004 8:00 pm
Re: TRANS4M v2.0
That is beautiful!
Now all it needs is a down-pipe, TMIC and a tune!
We can talk later.
Now all it needs is a down-pipe, TMIC and a tune!
We can talk later.
-
- DCAWD Founding Member
- Posts: 1189
- Joined: Fri Aug 27, 2004 8:00 pm
Re: TRANS4M v2.0
Woot!! Congrats brudda!! I'm so glad that you were able to find it so quickly. These cars don't generally last on the dealer lots for long. It's real hard to find an unmolested example. Good luck and let us know how we can help out with anything.
- Mr Kleen
- DCAWD Founding Member
- Posts: 15034
- Joined: Mon Apr 18, 2005 6:46 pm
- Location: Wiesbaden.DE
Re: TRANS4M v2.0
Looks good. I'm a fan of white cars in general.
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: TRANS4M v2.0
Congrats, looks great!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
-
- DCAWD Groupie
- Posts: 534
- Joined: Thu Mar 10, 2005 7:00 pm
- Location: Arlington, VA
Re: TRANS4M v2.0
Congrats!
- zaxrex
- DCAWD Founding Member
- Posts: 6350
- Joined: Mon Sep 06, 2004 8:00 pm
- Location: asiandale
Re: TRANS4M v2.0
Yeah buddy!
Patience is the ability to idle your motor when you feel like stripping your gears
- iceyinferno
- I walk to work
- Posts: 52
- Joined: Wed Apr 04, 2012 11:52 pm
- Location: Andrews AFB
Re: TRANS4M v2.0
Congrats! Looks awesome...I'm also a fan of white
As far as the tails go...VHT makes the red tint paint that I've seen have great results and there are a ton of writeups online for you to be able to do it yourself. Just a suggestion
As far as the tails go...VHT makes the red tint paint that I've seen have great results and there are a ton of writeups online for you to be able to do it yourself. Just a suggestion
04 Aspen White STi
-
- DCAWD Groupie
- Posts: 598
- Joined: Wed Jun 22, 2005 11:41 pm
- Location: ^^^^^, CO.
Re: TRANS4M v2.0
Congratulations!
As far as tail light tints, we took Anna's to Winners Tint up in MD. They did an okay job. We had to go back because it started coming off around the parts where it curves. They basically glued it back to the light and used a heat gun to shrink it where they could.
As far as tail light tints, we took Anna's to Winners Tint up in MD. They did an okay job. We had to go back because it started coming off around the parts where it curves. They basically glued it back to the light and used a heat gun to shrink it where they could.
My Name is Adam.
- TRANS4M
- Tricycle
- Posts: 210
- Joined: Mon Jul 31, 2006 4:06 pm
Re: TRANS4M v2.0
I don't think I'll paint the tail lights, it's too permanent. I thinking about buying the tint and doing it myself since most folks that pay to have it done it turns out "ok".
Adam, would you recommend Winners? Mind telling me how much they charged?
Adam, would you recommend Winners? Mind telling me how much they charged?
-
- DCAWD Groupie
- Posts: 598
- Joined: Wed Jun 22, 2005 11:41 pm
- Location: ^^^^^, CO.
Re: TRANS4M v2.0
I'll shoot you a PM.TRANS4M wrote:Adam, would you recommend Winners? Mind telling me how much they charged?
My Name is Adam.
- TRANS4M
- Tricycle
- Posts: 210
- Joined: Mon Jul 31, 2006 4:06 pm
Re: TRANS4M v2.0
Started a detail. Good thing about biking and metro'ing to work is that the car can sit in the garage for a long time. I got the front end done and will do a little here and there each night after work.
White cars is hard to make pop unlike red or black cars.
White cars is hard to make pop unlike red or black cars.
- 2011 SWP WRX Hatch limited
-
- DCAWD Groupie
- Posts: 598
- Joined: Wed Jun 22, 2005 11:41 pm
- Location: ^^^^^, CO.
- captainslow
- I'm starting to be a post wh0re
- Posts: 469
- Joined: Sun Jan 10, 2010 7:36 pm
- Location: Haha Hacienda
Re: TRANS4M v2.0
Congrats on the find! Your new ride looks awesome.
- TRANS4M
- Tricycle
- Posts: 210
- Joined: Mon Jul 31, 2006 4:06 pm
Re: TRANS4M v2.0
Thanks!
Here's what I've been up to. I removed the pin stripe (sorry no pics yet) and the clear bra in front of the rear wheel wells. I think it's a much cleaner look with it gone.
Before:
After:
Cost:
$8 for a large bottle of Goo Gone.
Here's what I've been up to. I removed the pin stripe (sorry no pics yet) and the clear bra in front of the rear wheel wells. I think it's a much cleaner look with it gone.
Before:
After:
Cost:
$8 for a large bottle of Goo Gone.
- 2011 SWP WRX Hatch limited
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: TRANS4M v2.0
Looking GOOD!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- TRANS4M
- Tricycle
- Posts: 210
- Joined: Mon Jul 31, 2006 4:06 pm
Re: TRANS4M v2.0
I'm looking in to getting an AP to go stage 1. But then I got to thinking.. with a downpipe, I can jump right to stage 2 for moar powers!
I'm thinking about the CNT catted downpipe. It looks like a great bargain. Which other downpipes should I take a look at? Anyone have first hand experience with CNT products?
I'm thinking about the CNT catted downpipe. It looks like a great bargain. Which other downpipes should I take a look at? Anyone have first hand experience with CNT products?
- 2011 SWP WRX Hatch limited
- drwrx
- DCAWD Founding Member
- Posts: 4382
- Joined: Mon Sep 20, 2004 8:00 pm
Re: TRANS4M v2.0
I don't have any experience with CNT products, but at $370 it looks like a good buy for a catted full length down-pipe. (Invidia knock-off).
You will need to get either a flat flange adapter (Grimm Speed has them for $40) for your stock cat-back or a different cat-back exhaust.
That said, I would point you toward Daddy's "shorty" down-pipe for $240.
http://www.daddysscp.com/product_p/mdsh08.htm
It keeps your second (least restrictive) cat in place and keeps the cat further down the exhaust stream for less turbo back pressure. Not to mention the $130 savings! The quality of their pieces has gotten high marks on the forums as well.
Also, the stock WRX TMIC's are known to fail under increased boost pressure. You can either "bulletproof" your TMIC (there are kits out there for about $50) or buy a larger aftermarket TMIC. I got a Torx Racing for $300 shipped. It is essentially a Perrin clone which is almost twice stock size and is a bar & plate contruction. I e-mailed them direct (sales@torxracing.com) and asked if they would still honor the price offered on NASIOC. They said yes and I PayPaled them and got the TMIC in 2 days. I have not installed it on My LGT yet, but it looks to be a quality unit. The photos on their site are incorrect. Just make sure you request the 08 WRX / 05 LGT TMIC. They make one for the 02-07 WRX / 04+ STi as well.
You will need to get either a flat flange adapter (Grimm Speed has them for $40) for your stock cat-back or a different cat-back exhaust.
That said, I would point you toward Daddy's "shorty" down-pipe for $240.
http://www.daddysscp.com/product_p/mdsh08.htm
It keeps your second (least restrictive) cat in place and keeps the cat further down the exhaust stream for less turbo back pressure. Not to mention the $130 savings! The quality of their pieces has gotten high marks on the forums as well.
Also, the stock WRX TMIC's are known to fail under increased boost pressure. You can either "bulletproof" your TMIC (there are kits out there for about $50) or buy a larger aftermarket TMIC. I got a Torx Racing for $300 shipped. It is essentially a Perrin clone which is almost twice stock size and is a bar & plate contruction. I e-mailed them direct (sales@torxracing.com) and asked if they would still honor the price offered on NASIOC. They said yes and I PayPaled them and got the TMIC in 2 days. I have not installed it on My LGT yet, but it looks to be a quality unit. The photos on their site are incorrect. Just make sure you request the 08 WRX / 05 LGT TMIC. They make one for the 02-07 WRX / 04+ STi as well.
-
- DCAWD Groupie
- Posts: 534
- Joined: Thu Mar 10, 2005 7:00 pm
- Location: Arlington, VA
Re: TRANS4M v2.0
My brother just ordered the CNT quad yip exhaust for his SPEC B...they seem legit!
Hey PM BarmanBean over on NASIOC...he bullet proofs TMIC and is here in SPringfield
Hey PM BarmanBean over on NASIOC...he bullet proofs TMIC and is here in SPringfield
- TRANS4M
- Tricycle
- Posts: 210
- Joined: Mon Jul 31, 2006 4:06 pm
Re: TRANS4M v2.0
Updates:
Thanks to Blue for the COBB intake. I like the sound. Don't judge me.
I went ahead with the CNT turboback.
Got the tails and windows tinted at AIG.
Thanks to Blue for the COBB intake. I like the sound. Don't judge me.
I went ahead with the CNT turboback.
Got the tails and windows tinted at AIG.
-
- DCAWD Groupie
- Posts: 534
- Joined: Thu Mar 10, 2005 7:00 pm
- Location: Arlington, VA
Re: TRANS4M v2.0
lookn' good
- Sabre
- DCAWD Founding Member
- Posts: 21432
- Joined: Wed Aug 11, 2004 8:00 pm
- Location: Springfield, VA
- Contact:
Re: TRANS4M v2.0
Looking real good!
Sabre (Julian)
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
92.5% Stock 04 STI
Good choice putting $4,000 rims on your 1990 Honda Civic. That's like Betty White going out and getting her tits done.
- Bluestreak2006
- DCAWD Groupie
- Posts: 741
- Joined: Fri Mar 23, 2007 10:17 am
- Location: Woodbridge
Re: TRANS4M v2.0
Intake looks familiar.... That exhaust looks great
Jay
11 STI Hatch
"Wagon Mafia"
Stage 1 Baby
11 STI Hatch
"Wagon Mafia"
Stage 1 Baby
- Mr Kleen
- DCAWD Founding Member
- Posts: 15034
- Joined: Mon Apr 18, 2005 6:46 pm
- Location: Wiesbaden.DE
Re: TRANS4M v2.0
I'm not usually a fan of the "blued titanium" exhaust tips but it works with the pearl white. Have you considered blue wheels?
-
- Tricycle
- Posts: 205
- Joined: Wed Nov 11, 2009 11:17 pm
- Location: Alexandria, VA
Re: TRANS4M v2.0
Looking good.
Would love to see one in white w/ the Martini livery.
Would love to see one in white w/ the Martini livery.